Category Archives: 3D Model

3D Printing, part 2, Irving J Gill blocks

Gill Cossitt cottages 1910 2015-6-17Playing with blockssteve wallet architect Gill blocks Cossitt blocks aerial 2015-6-17

steve wallet architect gill blocks above 2016-6-17I have long admired the Cossitt Cottages, a row of 4 simple houses built by San Diego’s first modern architect, Irving J Gill, in 1910 (first image). They are essentially the same cube house repeated 4 times (second image). A kit of parts consisting of arches, garden walls, and a small roof, is applied to each house in a different way. As the houses step back from the street they get another arch. Each house is a little different and feels unique. This is a very simple but powerful way of differentiating similar houses without resorting to applied surface decoration.steve wallet architect gill blocks close-up 2016-6-17steve wallet architect gill blocks in box 2016-6-17

I combined my interest in the Cottages with 3D printing to make a set of Gill/Cossitt Cottages building blocks (third image). The blocks let you “build” each of the 4 cottages (fourth image) and illustrate the “kit of parts” approach (fifth image). I made a prototype set of the blocks and the instructions/history page, all fitting in a clear plastic box. When folded in the box, the instruction sheet becomes the label for the set .

This set is one of the initial projects I have undertaken with the Irving J Gill Foundation. We hope to have it available soon.

Digiprove sealCopyright secured by Digiprove © 2015 Steve Wallet

3D Printing, part 1

steve wallet architect 3D print tile 2015-7-19Recently I have been looking into and learning about 3D printing. It allows me to convert my digital models into 3D models. This is done using a 3D printer, which is a cross between a laser jet printer and a hot glue gun. The model is “printed” in layers of melted plastic. The layers cool and stick together and voila! you have a 3D model.steve wallet architect 3D print schindler mcalmon front lft 2016-6-17

steve wallet architect 3D print schindler mcalmon front rt 2016-6-17When you 3D print buildings from a digital model you need to scale down the model. Your 40′ long wall is translated into a 2″ long plane.This requires interpretation of the design and modification of the model. Thin parts of the actual building get too thin when printed in a scaled-down model.These thin parts need to be thickened, adjusting the model for the limits of the printer while keeping the overall sense of the design. These models are roughly 2″ to 4″ on each side.steve wallet architect 3D print schindler mcalmon top 2016-6-17

Print 1: tile (top image)

I thought it would be easiest to print something that was in flat layers. I chose a tile designed by my friend and architect James B. Guthrie. It is meant to be made from stacked layers of computer cut steel and is inspired by the designs of the architect Louis Sullivan.

It was fun to do and I learned a lot, but not so easy – all those curves and layers!

Print 2: Schindler’s McAlmon Apartment (lower three images)

Feeling more confident, I wanted to try a 3D print of a building. I chose my favorite test Schindler, his McAlmon Apartment. I focused just on the Schindler designed front. I love the way it turned out.

Stay tuned for part 2, 3D printing architectural building blocks

 

Digiprove sealCopyright secured by Digiprove © 2015 Steve Wallet

Trains, history and small towns

steve wallet architect train station gateway watercolor 2014-11-16
steve wallet architect train station gateway dusk 2014-11-16Many small Midwestern towns have historic but derelict train stations on long unused rail lines. The station and tracks tend to be poorly located in the towns because the commercial centers have moved since the stations were originally built. Today, if they exist at all, the old depots are disconnected urban fragments.

steve wallet architect train station bike trail farmers market day 2014-11-16
This proposal, conceived of and designed by James B Guthrie, AIA of the Miletus Group, illustrates how they can be transformed to become assets that weave a town back together.

steve wallet architect train station gateway bird's eye 2014-11-16
In this design, the historic train station is relocated, placed alongside a second set of abandoned tracks in a central location next to Main Street. The restored depot becomes a gateway to the town and the central business district. The station houses retail shops, a cafe and a railroad and history museum. Restored rolling stock is placed on the tracks next to the station as part of the new train museum. The old rail lines and railroad right-of-way become a linear park, pedestrian and bike trail that connects to similar trails in the region. The station serves as a trail head.

steve wallet architect train station down tracks night 2014-11-16
I made these renderings with James to illustrate the possibilities of this concept:

.connecting currently fragmented parts of the town
.connecting the town to its history
.creating a gateway to the town
.creating a center for community activity with the permanent shops and museum as well as events such as farmers’ markets and performances.steve wallet architect train station cafe day 2014-11-16

Digiprove sealCopyright secured by Digiprove © 2014 Steve Wallet